China Water Pump Seals WM FTK is supplied with a fitting plug, as standard, which provides support to the elastomer bellows prior to fitting these seals. These rubber driven, rotary seal types are easily fitted and mass-produced, under Wendong’ stringent quality procedures. China Water Pump Seals WM FTK unitized elastomer bellows seals and utilized in small shaft diameter applications. Water Pump seals are designed for use in small centrifugal water pumps, deep and shallow well jet pumps, swimming pool pumps, submersible pumps, and wastewater pumps.
China Water Pump Seals WM FTK consists primarily of a rotary seal face with a driving mechanism which rotates at the same speed as the pump shaft, a stationary seal face which mates with the rotary and is retained using a gland or in some pump models an integral stuffing box cover, a tension assembly (utilizing springs or metal bellows) keeps the rotary face firmly positioned against the stationary face preventing, excluding, and containing contamination and leakage, both when the pump is not in operation and when the pump shaft is rotating. Static sealing gaskets, rings, or elastomeric bellows are strategically located to complete the seal assembly.
● Stationary ring: Ceramic, Silicon Carbide
● Rotary ring: Silicon Carbide
● Secondary seal: NBR, Viton, PTFE
● Spring and metal parts: SS304, SS316
Rotary Speed: ≤ 4500r/min
Temperature: -30℃ ~+150℃
gas engine antifreeze
● Rotary Ring(Ceramic/SiC)
● Stationary Ring (Plastic Carbon/ Carbon/Sic)
● Stationary Seat(Sus304/Sus316)
● Secondary Seal(nbr/Epdm/VITON)
● Rotary Ring Holder(Sus304/Sus316/Q235-A)
WenDong specializes in produce mechanical seals and custom mechanical seals solutions. By utilizing our extensive expertise, we can provide a complete solution to your challenge.
Chehe Industrial Park Shiqi Town Ningbo Zhejiang, China