 |
Mechanical Shaft Seals for Pumps WM T consists of rotating and stationary components that are tightly pressed together using both mechanical and hydraulic forces. The primary rings are made of silicon carbide as standard. For the mating rings the user can choose between silicon carbide and carbon graphite. A Mechanical Shaft Seals for Pumps WM T, or a mechanical water seal, also referred to as a mechanical face seal but usually simply as a mechanical seal, is a type of mechanical seal used in rotating equipment, such as pumps, mixers, blowers, and compressors.
Product Description
This Mechanical Shaft Seals for Pumps WM T is extensively used with rotary joints and rotating unions include various heat transfer media and fluid power media such as steam, water, thermal oil, etc. Our range of products include water pump mechanical seal, centrifugal pump mechanical seal, face mechanical seal, double mechanical seal, industrial pump mechanical seal, and pump mechanical seal. The Wendong pump shaft seal has a predictable lifetime due to the condition monitoring function. It is also environmentally friendly due to the water-lubricated system that saves energy through reduced friction.
1. Low friction resistance, no creeping when it starts, no vicious phenomenon.
2. The good sealing effect in dynamic and static sealing.
3. The good sealing effect even in non-lubrication conditions with good abrasion resistance.
4. High-pressure resistant, good adaptability, good compressive strength.
5. With good chemical corrosion resistance and different material options for 0-rings, Mechanical Shaft Seals for Pumps WM T almost can work in all mediums.
6. With a special structure, Mechanical Shaft Seals for Pumps WM T has good oil return property.
7. Simple groove structure and easy installation.
Pressure: ≤0.3MPa
Rotary Speed: ≤ 4000r/min
Temperature: -30℃ ~+150℃
● Stationary Ring(Plastic Carbon/Carbon/SiC)
● Secondary Seal(nbr/Epdm/Hnbr/VITON)
● Spring(Sus304/Sus316/65Mn)
● Other Parts(Sus304/Sus316/Q235-A)
