O Ring Mechanical Seals WMH12N consist of a donut-shaped ring (technically, a toroid) with a circular cross-section. They’re typically made of elastomers like Buna N, Neoprene, or silicone, but they also come in plastics like PTFE, metals, and other materials. Sizes range from fractions of an inch in diameter to several meters across. O Ring Mechanical Seals WMH12N is mainly used in the fluid static application (For example, water, oil, air, chemicals solvent, chemicals, etc.).
O Ring Mechanical Seals WMH12N by mechanical deformation that creates a barrier to a fluid’s potential leak path between two closely mated surfaces. o ring mechanical seals are typically installed in a groove that’s machined or molded in one of the surfaces to be sealed. Their rubber-like properties let the devices compensate for dimensional variations in the mating parts.
O-ring is mainly used in the fluid static application (For example, water, oil, air, chemicals solvent, chemicals, etc.). The temperature range is from -60 ℃ up to 220 ℃. The pressure in the static application should be less than 20MPa, which varies with different materials. Sometimes O-ring is used in the dynamic application with the pressure less than 5MPa and also used in a semi-conductor vacuum seal.
Pressure: ≤ 1MPa
Speed: ≤ 10m/s
Temperature: -20℃ ~+180℃
● Rotary Ring ( Carbon/Sic/tc)
● Stationary Ring (Ceramic/Sic/Tc)
● Secondary Seal(nbr/Epdm/VITON)
● Spring & Other Parts(Sus304/Sus316)
WenDong specializes in produce mechanical seals and custom mechanical seals solutions. By utilizing our extensive expertise, we can provide a complete solution to your challenge.
Chehe Industrial Park Shiqi Town Ningbo Zhejiang, China